BPNSQ - PERMAPOL ONE-PART POLYURETHANE SEALANT AND
- MSDS: BPNSQ
- Manufacturer: PRODUCTS RESEARCH AND CHEMICAL CORP
- Product Name: PERMAPOL ONE-PART POLYURETHANE SEALANT AND
- National Stock Number: 8030-00N033260
Product Identification
Product ID:PERMAPOL ONE-PART POLYURETHANE SEALANT AND
MSDS Date:07/24/1987
FSC:8030
NIIN:00N033260
MSDS Number: BPNSQ
Responsible Party
GLENDALE, CA 91209
US
Emergency Phone: 818-240-2060
Info Phone: 818-240-2060
Preparer: C.H.
Cage: DO563
Contractor
Telephone: 818-240-2060
Cage: DO563
Ingredients
XYLENE (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
OSHA PEL 100 PPM;150 STEL
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITATION. SKIN:LOCAL
IRRITATION. MAY CAUSE ALLERGIC SKIN RASH IN SENSITIVE INDIVIDUALS.
INHAL:IRRITATION TO NOSE AND THROAT. PROLONGED EXPOSURE ABOVE PEL
MAY CAUSE HEADACHE, DIZZINESS AND UNCON SIOUSNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . EYES:FLUSH WITH LUKE WARM WATER
FOR AT LEAST 15 MINUTES, CONSULT PHYSICIAN. SKIN:WASH WITH SOAP AND
WATER. IF SYMPTOMS PERSIST, CONSULT A PHYSICIAN. INHAL:REMOVE TO
FRESH AIR. IF SYMPTOMS ARE PRESENT CONSULT A PHYSICIAN.
Fire Fighting
Flash Point Method:PMCC
Flash Point:140F,60C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:SCOOP INTO CONTAINERS. CLEAN-UP RESIDUE WITH
1,1,1-TRICHLOROETHANE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:PR-5365-M CUSTOM COLOR.
Chemical Properties
Vapor Density:3.66
Spec Gravity:1.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:4
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SO*X, CO*X; HYDROGEN SULFIDE
Disposal
Waste Disposal Methods:NOT A HAZARDOUS WASTE ACCORDING TO EPA
REGULATIONS. CONSULT LOCAL, STATE AND FEDERAL REGULATIONS PRIOR TO
DISPOSAL OF SPILLAGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.